SSC JE 2018 Admit Card Tier 2 and Marks of All Candidates


Brief Description

SSC JE 2018 Admit Card Tier 2 and Marks of All Candidates. Paper 2 Admit card is available now as Paper 2 for SSC JE 2018 will be held on 29/12/2019. Staff Selection Commission holds an open competitive examination for the recruitment of Junior Engineer (Civil, Mechanical, Electrical, and Quantity Surveying & Contracts) for various Ministries/ Departments/ Organizations in the Government of India. The posts are Group „B‟ (Non-Gazetted), in Level-6 (Rs 35400- 112400/-) of pay matrix of 7th Central Pay Commission.


Important Links

Check Paper 1 Marks of All Login  |  Notice
Download Admit Card NWR  |  CR  |  NR  |  Others
Paper 1 Result Civil EL/ME   | Cutoff
Paper 1 Answer Key Notice
Login Click Here
Vacancies Click Here
Official Notification Click Here
Official Website Click Here


Important Dates

Apply Online Starts 01/02/2019
Last Date to Apply 25/02/2019
CBT Paper 1 Exam Date 23 – 27 Sep. 2019 
Paper 2 Exam Date 29 Dec. 2019


Like Facebook Page


Join Telegram Channel


Join Whatsapp Group


Application Fees

Gen./OBC ₹ 100/-
Female/Others ₹ 0/-


SSC JE 2018 Selection Process

SSC JE Selection Process involves two stages: Paper – I and Paper-II.

  • Paper – I, which is the first phase of the selection process, is an Objective Type Computer Based Test
  • Paper-II, which is the second stage, is a Descriptive Type Written Test

Candidates who will clear SSC JE Paper – I in SSC JE exam will be called for SSC JE Paper-II. The final selection will be based on the cumulative or total marks scored in both Paper – I and Paper-II. Posting will be given to the candidate on the basis of merit and preferences entered by them during SSC JE application form filling.


SSC JE 2018 Eligibility

Age limit for the posts of SSC JE 2018 (Junior Engineers) in various Ministries/ Departments as on 01- 08-2019 is as under:

S No

Organization

Post

Age limit

1

Central Water Commission

Junior Engineer (Civil)

Up to 32 years

2

Central Water Commission

Junior Engineer (Mechanical)

Up to 32 years

3

Central Public Works Department

(CPWD)

Junior Engineer (Civil)

Up to 32 years

4

Central Public Works Department (CPWD)

Junior Engineer (Electrical)

Up to 32 years

5

Department of Posts

Junior Engineer (Civil)

Up to 27 years

6

Military Engineer Services (MES)

Junior Engineer (Civil)

Up to 30 years

7

Military Engineer Services (MES)

Junior Engineer (Electrical and Mechanical)

Up to 30 years

8

Military Engineer Services (MES)

Junior    Engineer              (Quantity

Surveying and Contracts)

Up to 27 years

9

Farakka Barrage Project

Junior Engineer (Civil)

Up to 30 years

10

Farakka Barrage Project

Junior Engineer (Electrical)

Up to 30 years

11

Farakka Barrage Project

Junior Engineer (Mechanical)

Up to 30 years

12

Border Road Organization

Junior Engineer (Civil)

Up to 30 years

13

Central Water and Power Research Station

Junior Engineer (Civil)

Up to 30 years

14

Central Water and Power Research Station

Junior Engineer (Electrical)

Up to 30 years

15

Central Water and Power Research Station

Junior Engineer (Mechanical)

Up to 30 years

16

Directorate of Quality Assurance (Naval)

Junior Engineer (Mechanical)

Up to 30 years

17

Directorate of Quality Assurance (Naval)

Junior Engineer (Electrical)

Up to 30 years

18

National     Technical                  Research Organization (NTRO)

Junior Engineer (Civil)

Up to 30 years

19

National   Technical                Research Organization (NTRO)

Junior Engineer (Electrical)

Up to 30 years

20

National   Technical                Research Organization (NTRO)

Junior Engineer (Mechanical)

Up to 30 years

Essential Educational Qualifications/ Experience (as on 1st August 2019):

  • Essential Educational Qualification and experience, etc required for the various posts are as follows:

S

No

Post

Educational and Other Qualification

1

Junior Engineer (Civil), Central Water Commission.

Degree or Diploma in Civil Engineering from a recognized University or Institution

2

Junior Engineer (Mechanical) in Central Water Commission.

Degree or Diploma in Mechanical Engineering from a recognized University or Institution

3

Junior Engineer (Civil), CPWD

Diploma in Civil Engineering from a recognized University or Institute.

4

Junior Engineer (Electrical), CPWD

Diploma in Electrical or Mechanical Engineering from a recognized University or Institute.

 

5

Junior Engineer (Civil), Department of Posts

Three years Diploma or equivalent in    Civil Engineering from an institution recognized by the Central Government or State Government.

6

Junior Engineer (Civil), MES

Degree in Civil Engineering from a recognized University

Or

 

(a)    Three years Diploma in Civil Engineering from a recognized Institute or University or Board; and

(b)   Two years experience in Planning, Execution, and Maintenance of Civil Engineering works.

7

Junior Engineer (Electrical & Mechanical), MES

Degree in Electrical or Mechanical Engineering from a recognized University;

Or

 

(a)    Three years diploma in Electrical or Mechanical Engineering from a recognized Institute or University or Board; and

(b)   Two years experience in Planning, Execution, and Maintenance of Electrical or Mechanical Engineering works.

 

8

Junior Engineer (Quantity Surveying & Contracts), MES

Three years Diploma in Civil engineering from a recognized Institute/ University/ Board or equivalent;

or

(i) Passed Intermediate examination in  Buildings and Quantity Surveying Sub-Division-II of the

Institute of Surveyors (India).

9

Junior Engineer (Civil), Farakka Barrage Project.

Diploma in Civil Engineering from a recognized University or Institute or Board.

10

Junior       Engineer                (Electrical), Farakka Barrage Project.

Diploma in Electrical Engineering from a recognized University or Institute or Board.

11

Junior     Engineer               (Mechanical), Farakka Barrage Project.

Diploma in Mechanical Engineering from a recognized University or Institute or Board.

12

Junior Engineer (Civil), Border Roads Organization, Ministry of Defence.

Degree in Civil Engineering from a recognized University/ Institute

or

(a)    Three years Diploma in Civil Engineering from a recognized University/ Institute/ Board; and

(b)   Two years of working experience in Planning/

Execution/ Maintenance of Civil Engineering works.

13

Junior Engineer (Civil), Central Water Power Research Station.

Diploma in Civil Engineering from a recognized University.

14

Junior     Engineer (Electrical), Central Water Power Research

Station.

Diploma in Electrical Engineering from a recognized University.

15

Junior     Engineer (Mechanical), Central Water Power Research

Station.

Diploma in Mechanical Engineering from a recognized University.

16

Junior Engineer (Mechanical), Directorate of Quality Assurance, Naval.

Degree in Mechanical Engineering from a recognized University;

or

(a)    Three years Diploma in Mechanical Engineering from a recognized University or Institution; and

(b)   Two years experience in the respective fields.

17

Junior Engineer (Electrical), Directorate of Quality Assurance, Naval.

Degree in Electrical Engineering from a recognized University;

or

(a)    Three years Diploma in Electrical Engineering from a recognized University or Institution; and

(b)   Two years experience in the respective fields.

18

Junior  Engineer  (Civil),                                         National Technical Research Organization.

Diploma in Civil Engineering from recognized University/ Institution.

 

19

Junior       Engineer (Electrical), National Technical Research

Organization.

Diploma in Electrical Engineering from recognized University/ Institution.

20

Junior Engineer (Mechanical) National Technical Research Organization

Diploma in Mechanical Engineering from recognized University/ Institution


SSC JE 2018 Exam Pattern

  • The SSC JE 2018 Examination will consist of two papers i.e. Paper-I (Computer Based Examination) and Paper-II (Descriptive Type). Details of these Papers are as follows:
Paper 1 (CBT)
Subject Questions/ Marks Time
Reasoning 50/50 2 Hrs
GK 50/50

Part-A General Engineering (Civil & Structural)

or Part-B

General Engineering (Electrical)

or Part-C

General Engineering (Mechanical)

100/100
Total 200/200
Paper 2 (Descriptive)
Subject Marks Time

Part-A General Engineering (Civil & Structural)

or Part-B

General Engineering (Electrical)

or Part-C

General Engineering (Mechanical)

300 2 Hrs


SSC JE 2018 Syllabus

Indicative Syllabus

  • The standard of the questions in Engineering subjects will be approximate of the level of Diploma in Engineering (Civil/ Electrical/ Mechanical). All the questions will be set in SI units. The details of the syllabus are given below:

Paper-I:

  • General Intelligence & Reasoning: The Syllabus for General Intelligence would include questions of both verbal and non-verbal type. The test may include questions on analogies, similarities, differences, space visualization, problem-solving, analysis, judgment, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, arithmetical number series, etc. The test will also include questions designed to test the candidate‟s abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations and other analytical functions.
  • General Awareness: Questions will be aimed at testing the candidate‟s general awareness of the environment around him/ her and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observations and experience in their scientific aspect as may be expected of any educated person. The test will also include questions relating to India and its neighboring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity, and Scientific Research, etc. These questions will be such that they do not require a special study of any discipline. 

General Engineering: Civil & Structural, Electrical, and Mechanical:

  • Part-A (Civil Engineering):

 Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental Engineering.

Structural Engineering: Theory of Structures, Concrete Technology, RCC Design, Steel Design.

Part-B (Electrical Engineering):

 Basic concepts, Circuit law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring instruments, Electrical Machines, Fractional Kilowatt Motors, and single-phase induction Motors, Synchronous Machines, Generation, Transmission and Distribution, Estimation and Costing, Utilization and Electrical Energy, Basic Electronics.

Part-C Mechanical Engineering):

 Theory of Machines and Machine Design, Engineering Mechanics and Strength of Materials, Properties of Pure Substances, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Air standard Cycles for IC Engines, IC Engine Performance, IC Engines Combustion, IC Engine Cooling & Lubrication, Rankine cycle of System, Boilers, Classification, Specification, Fitting & Accessories, Air Compressors & their cycles, Refrigeration cycles, Principle of Refrigeration Plant, Nozzles & Steam Turbines.

Properties & Classification of Fluids, Fluid Statics, Measurement of Fluid Pressure, Fluid kinematics, Dynamics of Ideal fluids, Measurement of Flow rate, basic principles, Hydraulic Turbines, Centrifugal Pumps, Classification of steel.

 

Paper-II

  • Part-A (Civil & Structural Engineering):

Building Materials: Physical and Chemical properties, classification, standard tests, uses and manufacture/ quarrying of materials e.g. building stones, silicate-based materials, cement (Portland), asbestos products, timber and wood-based products, laminates, bituminous materials, paints, varnishes.

Estimating, Costing and Valuation: estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering, Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezoidal formula, Simpson‟s rule, Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.

Surveying: Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earthwork calculation, advanced surveying equipment

Soil Mechanics: Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses Index properties of soils, Atterberg‟s limits, ISI soil classification and plasticity chart Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quicksand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement Shear strength of soils, direct shear test, Vane shear test, Triaxial test Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content,  earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test

Hydraulics: Fluid properties, hydrostatics, measurements of flow, Bernoulli‟s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps, and turbines

Irrigation Engineering: Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, runoff coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies Different type of canals, types of canal irrigation, loss of water in canals Canal lining

– types and advantages Shallow and deep to wells, yield from a well Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy‟s theory of critical velocity Lacey‟s theory of uniform flow Definition of flood, causes and effects, methods of flood control, water logging, preventive measure Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes Major irrigation projects in India

Transportation Engineering: Highway Engineering – cross-sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel

Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast, fixtures and fastening,  track geometry, points and crossings, track junction, stations and yards Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety

Environmental Engineering: Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments Surface water drainage Solid waste management – types, effects, engineered management system Air pollution – pollutants, causes, effects, control Noise pollution – cause, health effects, control

Structural Engineering:

Theory of structures: Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section

Concrete Technology: Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water-cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures

RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams T-beams, lintels One way and two way slabs, isolated footings Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods)

Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders

  • Part-B (Electrical Engineering):

Basic concepts: Concepts of resistance, inductance, capacitance, and various factors affecting them Concepts of current, voltage, power, energy and their units

Circuit law: Kirchhoff‟s law, Simple Circuit solution using network theorems

Magnetic Circuit: Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration eg straight, circular, solenoidal, etc Electromagnetic induction, self and mutual induction

AC Fundamentals: Instantaneous, peak, RMS and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of RL and C, Resonance, Tank Circuit Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit

Measurement and measuring instruments: Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement, Measurement of frequency and phase angle Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges Use of CRO, Signal Generator, CT, PT and their uses Earth Fault detection

Electrical Machines : (a) DC Machine – Construction, Basic Principles of DC motors and generators, their characteristics, speed control and starting of DC Motors Method of braking motor,

Losses and efficiency of DC Machines (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, OC and SC Tests, Losses and efficiency Effect of voltage, frequency and wave form on losses Parallel operation of 1 phase /3 phase transformers Auto transformers (c) 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors Methods of braking, effect of voltage and frequency variation on torque speed characteristics

Fractional Kilowatt Motors and Single Phase Induction Motors: Characteristics and applications

Synchronous Machines – Generation of 3-phase emf armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power Starting and applications of synchronous motors

Generation, Transmission and Distribution – Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, HRC Fuses, Protection against earth leakage / over current, etc Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars Lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system Cable – Different type of cables, cable rating and derating factor

Estimation and costing: Estimation of lighting scheme, electric installation of machines and relevant IE rules Earthing practices and IE Rules

Utilization of Electrical Energy: Illumination, Electric heating, Electric welding, Electroplating, Electric drives, and motors

Basic Electronics: Working of various electronic devices eg P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET Simple circuits using these devices

  • Part- C (Mechanical Engineering):

Theory of Machines and Machine Design:

Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots

Engineering Mechanics and Strength of Materials:

Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of columns – Euler‟s and Rankin‟s theories, Thin walled pressure vessels

Thermal Engineering:

Properties of Pure Substances: p-v & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status Definition of dryness fraction of steam, degree of superheat of steam H-s chart of steam (Mollier‟s Chart)

1st Law of Thermodynamics: Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic process, Non-Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation

2nd Law of Thermodynamics: Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation of ideal gas processes Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility

Air standard Cycles for IC engines: Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency.

IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication

Rankine cycle of steam: Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump work

Boilers; Classification; Specification; Fittings & Accessories: Fire Tube & Water Tube Boilers

Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeration Plant; Nozzles & Steam Turbines

Fluid Mechanics & Machinery:

Properties & Classification of Fluid: ideal & real fluids, Newton‟s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids

Fluid Statics: Pressure at a point

Measurement of Fluid Pressure: Manometers, U-tube, Inclined tube

Fluid Kinematics: Stream line, laminar & turbulent flow, external & internal flow, continuity equation

Dynamics of ideal fluids: Bernoulli‟s equation, Total head; Velocity head; Pressure head; Application of Bernoulli‟s equitation

Measurement of Flow rate Basic Principles: Venturimeter, Pilot tube, Orifice meter

Hydraulic Turbines: Classifications, Principles Centrifugal Pumps: Classifications, Principles, Performance Production Engineering:

Classification of Steels : mild steal & alloy steel, Heat treatment of steel, Welding – Arc Welding,

Gas Welding, Resistance Welding, Special Welding Techniques ie TIG, MIG, etc (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes.


SSC JE 2018 Vacancies

There is a Total of 1601 tentative vacancies for SSC JE 2018. The details are Given Here in this Link. 


SSC JE Previous Papers PDFs

SSC JE Previous Papers PDF files can be downloaded directly from the Links given below. 

SSC JE Paper 1  CE Click Here
SSC JE Paper 1 EE Click Here
SSC JE Paper 1 ME Click Here
SSC JE Paper 2 CE Click Here
SSC JE Paper 2 EE Click Here
SSC JE Paper 2 ME Click Here

Click Here For SSC JE 2019 Recruitment